Display of my washing machine is blurry
Resolution
If the display of my washing machine is blurry, refer to the suggestions below for step by step instructions.
- Looking at the display from the side or above will make it seem unclear.
- Adjusting the brightness and contrast of the display will make it easier to read.
- If the appliance has brightness and contrast controls, refer to the user manual for detailed guidance.
If the above suggestions do not resolve the problem, we recommend contacting an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Was this article helpful?
Related Articles
- The door of the washing machine cannot be opened
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washing machine does not take detergents / water remains in the softener compartment
- Connected appliances - The application cannot connect to the appliance
- Washing machine stops in the middle of a cycle
- How to clean the washing machine detergent drawer
- Washing machine displays 1- minute pause
- White clothes turn grey after washing in my washing machine / washer dryer
- How to reset WiFi network settings on my Electrolux washing machine?
- Cleaning the washing machine’s rubber seal if it's dirty