Fridge freezer shows code E10
Issue
- Fridge freezer displays error code E10
Applies to:
- Fridge freezer
Resolution
- Error code E10 is likely to occur after a long term power failure, or when hot food has been left in the fridge
- Set the fridge temperature to a colder value or set Super Cool. This should remove the error code once the required temperature has been reached. Keep doors closed to improve the time taken to reach the correct temperature.
- Empty the location at the front area of air duct channel holes and avoid putting food close to the sensor
- If this warning continues an authorised technician needs to be contacted
Cause:
- The fridge compartment is not cold enough
Was this article helpful?
Related Articles
- How to avoid/reduce moisture formation in my fridge?
- My fridge freezer is not operating
- Drip tray location on integrated fridge freezer
- There is damage, a crack, scratch or hole in my Electrolux fridge freezer (video)
- The light does not work in my fridge-freezer
- Temperature in the fridge-freezer is too low
- Temperature in the fridge-freezer is too high/not cooling
- Is it possible to reverse the door on my fridge freezer?
- Fridge freezer shows F7 on the display
- Fridge freezer shows F6 on the display