How to change the drain filter in my Zanussi dishwasher?
Resolution
Issue:
- How to change the drain filter in dishwasher?
Applies to:
- freestanding dishwasher
- integrated dishwasher
Resolution:
1. Disconnect the appliance.
2. Slide the lower basket out.
3. Twist the filter to the right and pull out.
4. Put the new filter in place and twist to the left to secure.
- You can find spare parts, accessories and care products in our Webshop.
- Look at the PNC (Product Number Code) of your appliance and enter it in the search engine of the Webshop to find the correct and genuine spare parts for your appliance.
Was this article helpful?
Related Articles
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
- Dishwasher detergent dispenser does not fully open / does not open
- Dishwasher does not / will not start but the power is on
- Dishwasher does not switch on, no light on the panel
- Dishwasher comfort lift basket stuck in the upper position
- How to load and unload the dishwasher?
- Dishwasher salt consumption is too high
- Dishwasher is leaking
- Unpleasant odour from the dishwasher
- Dishwashers has poor washing results