I can hear a constant beep noise / my oven's display shows 400
Resolution
Issue:
- I can hear a constant beep noise and my oven's display shows "400" after activation. it indicates that the appliance is connected to 400V.
Applies to:
- integrated oven
- freestanding cooker
Resolution:
1. Check if the appliance is correctly connected to the electrical supply.
Refer to the installation instructions provided with the appliance. Ensure a correct installation by calling an authorized installer.
2. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- How to set a cooker timer (duration) / minute minder
- Oven displays error code (F and number)
- Oven displays SAFE or padlock symbol
- Zanussi Oven and Cooker Functions/Symbols
- How To Remove Oven Shelf Supports For Cleaning
- How to clean the Zanussi oven manually?
- Electric grill - open door grilling
- Temperature on the oven's display differs from the measured temperature
- Steam oven uses too much water during Sous Vide cooking
- Poor baking / roasting results