Light in the drum of the tumble dryer does not work
Resolution
Issue:
- Light in the drum of the tumble dryer does not work
Applies to:
- Tumble dryer
Resolution:
1. If the machine is new, check whether the machine’s specification includes an internal light.
2. If the tumble dryer is on and the light in the drum does not work, contact an Authorized Service Centre.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- Tumble dryer ends the programme immediately after the start
- Tumble dryer does not heat up
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer displays error message "Err"
- AEG Tumble dryer stops after a few minutes of the cycle
- Tumble dryer drum does not rotate, no error message
- Tumble dryer stops after a few minutes of the cycle
- Tumble dryer displays error message EHO, EH0
- Tumble Dryer generates scraping/rubbing noise while drum rotating
- Condenser tumble dryer does not dry properly and/or does not heat up and/or shows wrong time duration on the display