Opening washing machine's door at the beginning of wash cycle
Resolution
The door normally can be opened before the heating phase or when the height of water in the drum is low (during the first 10 minutes). Try to add more laundry.
Warning: If the door can be opened during a wash or spin cycle, when the washing machine is filled up with water, switch off the power supply to the appliance immediately. Do not use the washing machine until the problem is solved. Contact an Authorized Service Center.
Was this article helpful?
Related Articles
- The door of the washing machine cannot be opened
- Connected appliances - The application cannot connect to the appliance
- Washing machine stops in the middle of a cycle
- The "drum cleaning" icon shows on the washing machine display
- How to clean and maintain your Zanussi washing machine and extend its life
- How to clean the washing machine detergent drawer
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- The washing cycle is shorter / longer than indicated on the display
- Washing machine displays error message E30, C3 or emits 3 beeps
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes