Oven blows / Trips fuses
Issue
- Oven / Cooker blows / trips the fuse
Applies to:
- Integrated oven
- Single Oven
- Double Oven
- Combination Oven
- Microwave Oven
- Freestanding cooker
Resolution
- If the appliance has recently been installed or a new appliance has been added to the same circuit, this could indicate an installation error. In this instance we would recommend contacting your installer or electrician
- To check which appliance is causing the fault, turn off as many other appliances as possible, switch the power back on at the consumer unit switch the oven back on. This will determine if there is a fault with the oven or if there are too many appliances on the circuit.
If the above advice does not resolve the problem, we recommend a visit by a service technician. Contact our team to arrange a repair.
Was this article helpful?
Related Articles
- The door of the oven does not close properly
- How to prove the dough in the oven, if it is not equipped with special programme?
- How to set a cooker timer (duration) / minute minder
- Oven displays error code (F and number)
- Oven displays SAFE or padlock symbol
- Zanussi Oven and Cooker Functions/Symbols
- How To Remove Oven Shelf Supports For Cleaning
- How to clean the Zanussi oven manually?
- Electric grill - open door grilling
- Temperature on the oven's display differs from the measured temperature