Oven pyrolytic self - cleaning function gives poor results
Issue
- Oven pyrolytic self-cleaning function gives poor results
Applies to:
- Ovens with pyrolitic cleaning function
Resolution
1. If a burnt grease residue continues to appear after finishing a pyrolytic self-clean:
- Select an intensive Pyrolytic program. The number of Pyrolytic programs available may vary depending on the model. See the user manual, if applicable. Download .
2. Remove all parts from the oven.
3. Excess waste must be removed before Pyrolytic cleaning.
Light: 1 h for slightly dirty.
Normal: 1 h 30 min for moderately dirty.
Intensive: 2 h 30 min for very dirty.
4. If spots continue to appear after a finishing the Pyrolytic self-cleaning function:
These permanent colour changes in the enamel can, for example, be caused by fruit juices or greasy impurities in combination with high temperatures.
- These spots can not be removed.
- These are usage traces.
- They have no influence on the usability of the device and are not a defect.
Recommended: Preform the Pyrolytic program more often to prevent similar situations from occurring again.
Was this article helpful?
Related Articles
- Oven displays error code (F and number)
- Oven displays SAFE or padlock symbol
- Zanussi Oven and Cooker Functions/Symbols
- How To Remove Oven Shelf Supports For Cleaning
- How to clean the Zanussi oven manually?
- Electric grill - open door grilling
- Temperature on the oven's display differs from the measured temperature
- Steam oven uses too much water during Sous Vide cooking
- Poor baking / roasting results
- Oven steam self - cleaning function