Seal on the washing machine's door is damaged
Resolution
Issue:
- The seal on the washing machine's door is loose, damaged or deformed
Applies to:
- Front loader washing machine (integrated and freestanding)
Resolution:
1. Contact an Authorized Service Center.
If the door seal is loose, damaged or deformed we recommend requesting a visit by a service engineer to replace the seal.
Cause:
1. Damage to the washing machine's door seal is normally caused by overloading the machine or catching the laundry between the seal and the door pane at the start of a wash cycle.
2. Washing fabrics which are heavily soiled with oil, grease or other greasy substances can damage rubber parts of the washing machine.
Prewash such fabrics by hand before loading them into the washing machine.
Was this article helpful?
Related Articles
- The "drum cleaning" icon shows on the washing machine display
- How to clean and maintain your Zanussi washing machine and extend its life
- How to clean the washing machine detergent drawer
- Connected appliances - The application cannot connect to the appliance
- Washing machine stops in the middle of a cycle
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- The door of the washing machine cannot be opened
- The washing cycle is shorter / longer than indicated on the display
- Washing machine displays error message E30, C3 or emits 3 beeps
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes