The lid on my top load washing machine will not close
Resolution
Issue:
- The lid on my top load washing machine will not close
Applies to:
- top load washing machine
Resolution:
1. To correct this error, simply slide the pin back to its original position.
2. If the problem persists, we recommend requesting a visit by a service engineer.
Cause:
- One possible cause of this error is that one of the two pins has loosened in the cover hinge.
Was this article helpful?
Related Articles
- The "drum cleaning" icon shows on the washing machine display
- How to clean and maintain your Zanussi washing machine and extend its life
- How to clean the washing machine detergent drawer
- Connected appliances - The application cannot connect to the appliance
- Washing machine stops in the middle of a cycle
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- The door of the washing machine cannot be opened
- The washing cycle is shorter / longer than indicated on the display
- Washing machine displays error message E30, C3 or emits 3 beeps
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes