Tumble dryer displays error message C6
Resolution
Issue:
- Tumble dryer displays error message C6
Applies to:
- tumble dryer
Resolution:
1. If the tumble dryer displays error code C6, there is a problem with the moisture sensor.
The cycle takes longer than normal, more than 4.5 hours.
- Check if the machine is connected to an grounded socket.
- If not, there is a problem with the moisture measurement, which can be repaired by an Authorized Service Center.
2. To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- Tumble dryer displays error message E50
- Tumble dryer emits unusual noises
- Tumble dryer emits unpleasant smells
- Tumble dryer does not heat up
- Tumble dryer displays error message E60 and does not heat up
- Tumble dryer stops after a few minutes of the cycle
- Start - Pause LED flashes on tumble dryer
- Excessive moisture in room, on walls and windows where the tumble dryer is located
- Tumble dryer displays error message E40
- Drying cycle is too long