Tumble dryer displays error message CE / CF
Resolution
Issue:
- Tumble dryer displays error message CE / CF
Applies to:
- tumble dryer
Resolution:
1. If the tumble dryer displays error code CE or CF, there is a problem with the electronics.
2. To resolve this issue, contact an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- How to change the dryer door opening directions?
- Tumble dryer displays error message E60 and does not heat up
- How long does a full load take to dry in a dryer – heat pump vs condenser?
- Tumble dryer drum does not rotate, no error message
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer displays a padlock
- AEG Tumble dryer stops after a few minutes of the cycle
- Start - Pause LED flashes on tumble dryer
- Tumble dryer stops after a few minutes of the cycle
- Cleaning tumble dryer filters and condenser