Washing machine displays error message E70
Issue
- Washing machine displays error message E70 (or any code beginning with E7*). It generally refers to a temperature sensor problem with the machine.
Applies to:
- Washing machine
- Washer-dryer
Resolution
1. Contact an Authorised Service Centre.
A service visit by one of our approved service providers is recommended.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Cause:
- The Temperature ( NTC ) sensor in your appliance has stopped working or is damaged
Was this article helpful?
Related Articles
- The "drum cleaning" icon shows on the washing machine display
- How to clean and maintain your Zanussi washing machine and extend its life
- How to clean the washing machine detergent drawer
- Connected appliances - The application cannot connect to the appliance
- Washing machine stops in the middle of a cycle
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- The door of the washing machine cannot be opened
- The washing cycle is shorter / longer than indicated on the display
- Washing machine displays error message E30, C3 or emits 3 beeps
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes