Washing machine is drawing in water when switched off
Resolution
If the washing machine draws in water even though it is switched off, it may be caused by dirt in the water valve.
- In many cases, it can be repaired by starting a quick-wash cycle and rinsing water through the valve.
- If the problem persists, we recommend contacting an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Was this article helpful?
Related Articles
- Dark or brown stains on laundry after washing in washing machine
- Connected appliances - The application cannot connect to the appliance
- Cleaning the washing machine’s rubber seal if it's dirty
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- How to reset WiFi network settings on my Electrolux washing machine?
- Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash
- The "drum cleaning" icon shows on the washing machine display
- Washing machine stops in the middle of a cycle
- Where can I find appliance's PNC number?
- Washing machine displays error message E90, E91, E92, E93 or E94