Compact dishwasher displays error message E1, does not fill with water
Resolution
Issue:
- Compact dishwasher displays error message E1
- The appliance does not fill with water
- Compact dishwasher emits acoustic signal for approximately 30 seconds
Applies to:
- Integrated compact dishwasher
- Free-standing compact dishwasher
Resolution:
1. Make sure that the water tap is open.
2. Make sure that the water tap is not clogged.
3. Make sure that the pressure of the water supply is not too low.
Recommended water pressure is between 0.04-1.0MPa.
For this information, contact your local water authority.
Cause:
- Tap is not open or water intake is restricted or water pressure is too low.
Was this article helpful?
Related Articles
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Dishwasher displays error message i30, drains constantly
- Dishwasher does not / will not start but the power is on
- Dishwasher displays error message i40, i43 or i44
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
- Dishwasher does not beep at the end of the cycle
- Dishwasher comfort lift basket stuck in the upper position
- Dishwasher door does not close
- Cycle indicator light is flashing on the dishwasher
- Dishwasher settings reset after each cycle
Related Articles
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Dishwasher displays error message i30, drains constantly
- Dishwasher does not / will not start but the power is on
- Dishwasher displays error message i40, i43 or i44
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
- Dishwasher does not beep at the end of the cycle
- Dishwasher comfort lift basket stuck in the upper position
- Dishwasher door does not close
- Cycle indicator light is flashing on the dishwasher
- Dishwasher settings reset after each cycle