How to replace the control box

Question

Accepted Answer

Refer always to your product’s user manual safety information before any repair or maintenance operation. https://www.electrolux.com/support/user-manuals/

WARNING! RISK OF ELECTRIC SHOCK

Before any repair or maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.

WARNING! RISK OF INJURY

Always take care when moving appliances. For heavy appliances it's safest for two persons to move it. Always use safety gloves and safety footwear. Wear safety gloves at all times to protect from cuts from sharp edges.

WARNING! RISK OF EYE INJURY

Wear safety glasses if you perform maintenance or repair work involving springs.

WARNING! CHOKING HAZARD

Small parts not for children under 3 years. Keep all small parts and packaging out of reach of children.

Only adults should use or install the product.

Make sure to use the product only for its designated purpose and verify that it is a compatible part for the intended product.

Do not use or install the product if damaged.

Please note that self-repair or nonprofessional repair can have safety consequences if not done properly and might void the warranty. Possessing the necessary know-how is essential.

How to replace the control box

1. Remove the filter. Pull down the latch in the handle structure to unsnap the filter.

2. Remove the slider. Pull out the slider to reach the back.

Unfasten 4screws which secure the slider.

Unfasten 2 screws which secure the slider blockers.

Pull out to remove the Slider

Push button variants

Unsnap the cover

Pull out the control box

Remove the cover

How to replace the control box 11)

Issue

Applies to:

Resolution

How to replace the control box

Was this article helpful?