Integrated coffee machine - the coffee pours out too slowly or one drop at a time
Issue
- Integrated coffee machine - the coffee pours out too slowly or one drop at a time
Resolution
1. Make sure that the water tank is full.
2. Make sure the coffee is not ground too finely.
In this case, change the setting to a rougher grind. Turn the knob on the grinder with one click in a clockwise direction towards "7” on a machine with a display to set the coarseness.
Note: Turn the button only when the grinder’s motor is operating.
Continue one click at a time until the coffee is how you want it. The effect will not be visible until two cups of coffee have been brewed.
3. Clean the filter holder and anti-drip valve.
4. Do not push the espresso powder down too hard in the filter.
5. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- The message "GROUND TOO FINE ADJUST MILL AND PRESS OK" is shown on the display of my integrated coffee machine (video)
- The message "GENERAL ALARM!" is shown on the display of my integrated coffee machine
- The message "EMPTY WASTE COFFEE CONTAINER" is shown on the display of my integrated coffee machine
- Integrated coffee machine makes too less milk foam or has bad frothing (video)
- Integrated coffee machine - the coffee isn’t creamy enough
- When I use my integrated coffee machine, the coffee doesn’t taste nice
- Integrated coffee machine - the coffee isn’t hot enough (video)
- Integrated coffee machine - the coffee is flowing, but doesn’t come out
- Integrated coffee machine - only water comes out of the spouts, no coffee