Oven clock flashes or time displaying 00:00 / 12:00 - Zanussi

Issue

• Oven clock flashes
• Oven clock displays "0:00" or "12:00" and flashes
• How to set the oven clock in my Zanussi oven?

Applies to:

• integrated oven
• freestanding cooker

Resolution

Flashing "0:00" on the clock’s display may be caused by an earlier power failure in the socket to which the oven is connected to. You need to set the oven clock again.

The clock setting method may vary, depending on appliance user interface.

Consult your user manual for more information.

Touch control (without + and - on display)

After the first connection to the mains, wait until the display shows: hr, 12:00. 12 - flashes.

1. Turn the knob for the temperature to set the hour.

2. - press to confirm. The display shows the set hour and: min. 00 - flashes.

3. Turn the knob for the temperature to set the minutes.

4. - press to confirm. The display shows the set time.

To change the time of the day, press repeatedly. The clock icon flashes in the display.

Touch control (with + and - on display)

How to set: Time of Day

- flashes when you connect the oven to the electrical supply, when there was a power cut or when the timer is not set.

1. Press "+ and "-" to set the time.

2. After approximately 5 sec., the flashing stops and the display shows the time.

How to change: Time of Day

- press repeatedly to change the time of day. - starts to flash.

1. Press "+ and "-" to set the time.

2. After approximately 5 sec., the flashing stops and the display shows the time.

Button control (Older style)

How to set: Time of Day

- flashes when you connect the oven to the electrical supply, when there was a power cut or when the timer is not set.

1. Press "+ and "-" to set the time.

2. After approximately 5 sec., the flashing stops and the display shows the time.

How to change: Time of Day

- press repeatedly to change the time of day. - starts to flash.

1. Press "+ and "-" to set the time.

2. After approximately 5 sec., the flashing stops and the display shows the time.

Updated Button display

How to set: Time of Day

- flashes when you connect the oven to the electrical supply, when there was a power cut or when the timer is not set.

1. Press "+ and "-" to set the time.

2. After approximately 5 sec., the flashing stops and the display shows the time.

How to change: Time of Day

- press repeatedly to change the time of day. - starts to flash.

1. Press "+ and "-" to set the time.

2. After approximately 5 sec., the flashing stops and the display shows the time.

Free Standing Cookers

You must set the time before you operate the oven.

How to set: Time of Day

- flashes when you connect the oven to the electrical supply, when there was a power cut or when the timer is not set.

1. Press "+ and "-" to set the time.

2. After approximately 5 sec., the flashing stops and the display shows the time.

How to change: Time of Day

- press repeatedly to change the time of day. - starts to flash.

1. Press "+ and "-" to set the time.

2. After approximately 5 sec., the flashing stops and the display shows the time.

If you found the following information helpful, please give us a thumbs up below. If this information did not resolve your question, all constructive feedback is welcome.

Cause:

• Flashing "0:00" on the clock’s display may be caused by an earlier power failure in the socket to which the oven is connected to.