Oven displays error code F602 or F603
Resolution
Issue:
- Oven displays error code F602 or F603
Applies to:
- built-in connected oven
Resolution:
1. Turn the oven off and on.
DISPLAY CODE | DESCRIPTION |
F602, F603 | Wifi signal is not available |
2. When one of these error messages continues to appear on the display, it means a faulty subsystem may have been disabled.
In such a case contact your dealer or an Authorized Service Center.
If one of these errors occurs, the rest of the oven functions will continue to work as usually.
Was this article helpful?
Related Articles
- How To Remove Oven Shelf Supports For Cleaning
- Zanussi Oven and Cooker Functions/Symbols
- How to clean the Zanussi oven with pyrolytic function?
- Resetting PYR or CATA on the oven's display
- Roasting in modern electric ovens
- Oven light not working on some settings
- Oven displays error message F11 / F111
- After a power cut how to set the ovens time - Zanussi
- The door of the oven does not close properly
- Oven displays error code (F and number)
Related Articles
- How To Remove Oven Shelf Supports For Cleaning
- Zanussi Oven and Cooker Functions/Symbols
- How to clean the Zanussi oven with pyrolytic function?
- Resetting PYR or CATA on the oven's display
- Roasting in modern electric ovens
- Oven light not working on some settings
- Oven displays error message F11 / F111
- After a power cut how to set the ovens time - Zanussi
- The door of the oven does not close properly
- Oven displays error code (F and number)