Refrigerator shows a line (“— “) on the display
Resolution
Issue:
- Fridge display shows dashes “—“
- The temperature inside the fridge is lower than 0°C
Applies to:
- Fridge freezer
- Refrigerator
Resolution:
1. Check whether the appliance is cooling correctly.
- Measure the temperature with a thermometer in a glass of water placed inside the fridge.
- If the temperature is between +4 to +5°C, the fridge is working correctly.
- The core temperature of foodstuffs is more important than the internal air temperature of the fridge, as air temperature will fluctuate during each refrigeration cycle (between the refrigeration compressor starting and stopping).
- Please note that cheaper thermometers may show variations of ±1–2°C or more.
- Adjust the temperature by turning the temperature regulator or via the control panel.
2. Contact an Authorized Service Center.
If the above suggestion did not solve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- Temperature in the refrigerator is too low
- Temperature is too high in the fridge / fridge not cooling
- Refrigerator shows an alarm, red warning light, flashing triangle or beeps
- There is damage, a crack, scratch or hole in the wine cooler
- There is damage, a crack, scratch or hole in the refrigerator
- The light does not work in my wine cooler
- The light does not work in my refrigerator
- Refrigerator shows F6 on the display
- Refrigerator shows F4 on the display
- Refrigerator shows F3 on the display