Seal on the washing machine's door is damaged
Resolution
Issue:
- The seal on the washing machine's door is loose, damaged or deformed
Applies to:
- Front loader washing machine (integrated and freestanding)
Resolution:
1. Contact an Authorized Service Center.
If the door seal is loose, damaged or deformed we recommend requesting a visit by a service engineer to replace the seal.
Cause:
1. Damage to the washing machine's door seal is normally caused by overloading the machine or catching the laundry between the seal and the door pane at the start of a wash cycle.
2. Washing fabrics which are heavily soiled with oil, grease or other greasy substances can damage rubber parts of the washing machine.
Prewash such fabrics by hand before loading them into the washing machine.
Was this article helpful?
Related Articles
- Washing machine’s fluff filter is jammed, cannot be removed
- Laundry is stiff or hard after washing in washing machine
- Washing machine displays error message E80 or emits 8 flashes
- How can I access the filter in my Zanussi washing machine?
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- The door of the washing machine cannot be opened
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Rust on washing machine's drum
- Connected appliances - The application cannot connect to the appliance
- Washing machine does not heat water, and does not display an error message