Small marks on washing machine or tumble dryer glass door
Resolution
Issue:
- Small marks on washing machine or tumble dryer glass door
Applies to:
- washing machine
- tumble dryer
Resolution:
1. A small mark in the middle of the outer safety glass is not a malfunction of the machine.
- The mark is the casting point where the plastic is injected into the mold when the glass is produced.
- The outer plastic glass is a safety glass used to prevent burning your fingers when the washing machine washes with hot water, or the tumble dryer dries at high temperatures.
- The mark does not affect the machine’s function or life.
Was this article helpful?
Related Articles
- Connected appliances - The application cannot connect to the appliance
- Why is there water or moisture is in my washing machine before the first use?
- How can I access the filter in my Zanussi washing machine?
- The lid on my top load washing machine will not close
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- The door of the washing machine cannot be opened
- How to clean and maintain your Zanussi washing machine and extend its life
- Grey marks on laundry after washing in washing machine
- The washing machine drum resists when you try to turn it by hand
- Laundry is stiff or hard after washing in washing machine