Washing machine displays error message E70
Issue
- Washing machine displays error message E70 (or any code beginning with E7*). It generally refers to a temperature sensor problem with the machine.
Applies to:
- Washing machine
- Washer-dryer
Resolution
1. Contact an Authorised Service Centre.
A service visit by one of our approved service providers is recommended.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Cause:
- The Temperature ( NTC ) sensor in your appliance has stopped working or is damaged
Was this article helpful?
Related Articles
- Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Washing machine displays error message E90, E91, E92, E93 or E94
- Washing machine displays error message E30, C3 or emits 3 beeps
- How can I access the filter in my Zanussi washing machine?
- How to clean the washing machine detergent drawer
- The door of the washing machine cannot be opened
- How to drain a washing machine/washer dryer
- Connected appliances - The application cannot connect to the appliance
- Washing machine blows fuses / trips RCD circuit breaker