Washing machine displays three dashes
Issue
- Washing machine displays three dashes
Applies to:
- washing machine
Resolution
- Reset the machine by switching off the power and reconnecting after approx. 1 minute.
- Then disable the child safety lock, as instructed in the user manual. Download .
Cause:
If the washing machine displays three dashes, indicates the washing machine has finished the cycle with the “CHILD LOCK” enabled and the washing machine is then switched off using the selector button or a power outage occurs.
- Three dashes may appear on the display when the washing machine is switched on.
The TC4 Display, touch screen is locked:
 | Three dashes on the display. |
 | Notification of “Child lock” enabled. |
Was this article helpful?
Related Articles
- The lid on my top load washing machine will not close
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- Connected appliances - The application cannot connect to the appliance
- The door of the washing machine cannot be opened
- How to clean and maintain your Zanussi washing machine and extend its life
- Grey marks on laundry after washing in washing machine
- The washing machine drum resists when you try to turn it by hand
- Laundry is stiff or hard after washing in washing machine
- How can I access the filter in my Zanussi washing machine?
- Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash