Washing machine is drawing in water when switched off
Resolution
If the washing machine draws in water even though it is switched off, it may be caused by dirt in the water valve.
- In many cases, it can be repaired by starting a quick-wash cycle and rinsing water through the valve.
- If the problem persists, we recommend contacting an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Was this article helpful?
Related Articles
- Washing machine displays error message E90, E91, E92, E93 or E94
- Washing machine stops in the middle of a cycle
- Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Washing machine displays error message E30, C3 or emits 3 beeps
- How can I access the filter in my Zanussi washing machine?
- How to clean the washing machine detergent drawer
- The door of the washing machine cannot be opened
- How to drain a washing machine/washer dryer
- Connected appliances - The application cannot connect to the appliance