Hob blows/ trips fuse
Issue
- Hob / cooker continuously blows / trips the fuse
Applies to:
- Induction hobs
- Electric (ceramic) hobs
- Gas hobs
Resolution
1. Make sure that the fuse is sufficient for the power load.
Check with your electrician if you have the right fuse size and if the hob is connected to a separate fuse group.
2. Check if the appliance is correctly connected to the electrical supply.
Ensure a correct installation by calling an authorized installer.
3. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- Only one side of the hob is operating
- Hob displays message P
- Hob displays error message E8 / E822
- When activating the inner zone of a cooking field, it appears that the outer zone is also heating
- Damage to ceramic and induction hob glass - Impact damage and stress damage (cracked glass)
- What cookware is suitable for cooking zones with induction heating?
- Hot plate switches itself off / beeps
- My hob does not turn on
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433
- Empty pan burned on the hob
Related Articles
- Only one side of the hob is operating
- Hob displays message P
- Hob displays error message E8 / E822
- When activating the inner zone of a cooking field, it appears that the outer zone is also heating
- Damage to ceramic and induction hob glass - Impact damage and stress damage (cracked glass)
- What cookware is suitable for cooking zones with induction heating?
- Hot plate switches itself off / beeps
- My hob does not turn on
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433
- Empty pan burned on the hob