Hob displays error message E0 / E1
Resolution
Issue:
- Hob displays error message E0 / E1
Applies to:
- integrated electric hob
- integrated induction hob
Resolution:
1. Disconnect the appliance from power for at least 30 seconds.
Reconnect it and switch it back on.
2. Contact an Authorized Service Center.
If the above advice do not resolve the problem, we recommend requesting a visit by a service engineer.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Cause:
- Error message E0 / E1 indicates a fault with the electronics.
Was this article helpful?
Related Articles
- Gas hob - Ignition issues
- When switched the gas hob OFF and ON the message F appears, burners cannot be ignited
- My hob does not turn on
- How to turn off DEMO mode in Electronic gas hob?
- Hot plate switches itself off / beeps
- Hob display flashes between two figures / stuck on simmer / unable to use all zones at the same time
- Hob displays message F
- What cookware is suitable for cooking zones with induction heating?
- The stainless steel frame of the ceramic hob gets very hot
- The SenseBoil function does not work in my Electrolux induction hob