Hob displays error message E7
Resolution
Issue:
- Hob displays error message E7
Applies to:
- integrated induction hob
- freestanding cooker with induction hob
Resolution:
1. To resolve the cooling fan issue:
- Open the drawer under the hob and make sure that nothing is blocking the fan.
- Disconnect the appliance from power for at least 30 seconds.
- Reconnect it and switch it back on.
2. Contact an Authorized Service Centre
If the above advices do not resolve the problem or your appliance is from before 2010 we recommend requesting a visit by a service engineer.
Cause:
- Error message E7 indicates a cooling fan error in newer appliances, and a power board error in appliances made before 2010.
Was this article helpful?
Related Articles
- Damage to ceramic and induction hob glass - Impact damage and stress damage (cracked glass)
- What cookware is suitable for cooking zones with induction heating?
- Hot plate switches itself off / beeps
- Hob blows/ trips fuse
- My hob does not turn on
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433
- Empty pan burned on the hob
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Hob displays message A
- Hob displays error message E6 / E641