One of the rings on my Gas Cooker/Hob won’t stay alight?
Issue
- The burner flame goes out after you have let go of the control knob
Applies to:
- Freestanding Cooker
- Gas Hob
Resolution
- Push the control knob down and turn it counterclockwise to the maximum position, don't try to ignite the burner in a minimum position.
- After you have lit the flame, keep the knob pushed for at least 10 seconds.
- Check the burner cap and crown are positioned correctly and that the burner crown is clean or if you just cleaned them make sure they are completely dry
If the above steps don't resolve the issue then a service visit by one of our approved service providers is recommended.
Cause:
- The burner cap or crown are not placed correctly or blocked with debris/water
- The thermocouple has failed
Was this article helpful?
Related Articles
- Induction hob emits an unusual sound
- What cookware is suitable for cooking zones with induction heating?
- Hot plate switches itself off / beeps
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Induction Hob Installation Faults
- Hob displays error message E8 / E822
- Gas hob - Ignition issues
- How to clean Electrolux induction or radiant hob?
- Hob displays message A
- Hob displays message H
Book a service
Having issues with your appliance? Book a reliable and professional service from our expert technicians to get your product up and running.
Related Articles
- Induction hob emits an unusual sound
- What cookware is suitable for cooking zones with induction heating?
- Hot plate switches itself off / beeps
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Induction Hob Installation Faults
- Hob displays error message E8 / E822
- Gas hob - Ignition issues
- How to clean Electrolux induction or radiant hob?
- Hob displays message A
- Hob displays message H