When switched the gas hob OFF and ON the message F appears, burners cannot be ignited
Resolution
Issue:
- Gas hob displays message H and those burners cannot be ignited
- When switched the hob OFF and ON the message F appears
Applies to:
- Electronic Gas hobs
Resolution:
1. Deactivate and activate the hob.
- After light animation, when "F" reappears, touch "||" and then within 3 seconds.
- When you see "0" the fault is reset
2. Make sure that the crown and the flame cap are correctly positioned, and clean the metal part of the flame safety device.
3. Contact an Authorized Service Center.
If the above advices do not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- Damage to ceramic and induction hob glass - Impact damage and stress damage (cracked glass)
- What cookware is suitable for cooking zones with induction heating?
- Hot plate switches itself off / beeps
- Hob blows/ trips fuse
- My hob does not turn on
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433
- Empty pan burned on the hob
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Hob displays message A
- Hob displays error message E6 / E641