Gas hob displays error message E6
Resolution
Issue:
- Gas hob displays message E6
- E6 comes on
- one or more burners cannot be ignited
Applies to:
- Electronic Gas hobs
Resolution:
1. Deactivate and activate the hob.
- E6 reappears, touch "||" and then within 3 seconds.
- When you see "0" the fault is reset
2. Make sure that the crown and the flame cap are correctly positioned, and clean the metal part of the flame safety device.
3. Contact an Authorized Service Center.
If the above advices do not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- The SenseBoil function does not work in my induction hob
- The drawer under induction hob gets very hot
- Hot plate switches itself off / beeps
- The ignition on my gas hob keeps sparking
- One of the rings on my Gas Cooker/Hob won’t stay alight?
- What Do The Gas Mark Numbers Mean / Relate To Temperatures?
- Hob displays error message E9
- Hob blows/ trips fuse
- Hob displays error message E6 / E641
Related Articles
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- The SenseBoil function does not work in my induction hob
- The drawer under induction hob gets very hot
- Hot plate switches itself off / beeps
- The ignition on my gas hob keeps sparking
- One of the rings on my Gas Cooker/Hob won’t stay alight?
- What Do The Gas Mark Numbers Mean / Relate To Temperatures?
- Hob displays error message E9
- Hob blows/ trips fuse
- Hob displays error message E6 / E641